posted
I found a 81 toyota today that I'm thinkin about pickin up but I wanted to see your guy's thoughts about it first cuz well I know u know your shit. This truck would be drivin for a short time than I'd pretty much turn it into a crawler is my hopes for it.
Its an 81 with a 22r 4cyl motor, 5 speed man tran, warner lock outs on front, new breaks all the way around. 93xxx miles. Frame had rust but the guy went in an reinforced it and welded in new sections from my understanding. It has a 4 inch (arched leafs) and 31x10's on it.
Any comments will help with this, I've been lookin for a yota to buy and think I might have finally found a good one. thanks guys
Posts: 208 | From: Chaska MN | Registered: Aug 2002
| IP: Logged |
posted
If the body is good it's worth it. If the engine is strong it's worth it. But be careful that the frame has not been broken.
Posts: 5484 | From: St. Paul, Mn | Registered: Apr 2002
| IP: Logged |
posted
Yeah, I'm going to take a look at it today hopefully. I'm hopin the frame is good, He said that he did some reinforcing and welding so it might be a cobbled mess which would suck, but if not I'm gonna see if I can talk him down to 500 bucks he's askin 750 cash talks
Posts: 208 | From: Chaska MN | Registered: Aug 2002
| IP: Logged |
posted
You can buy my truck matress. Let me know if you want details.
86 toyota 4runner.
-------------------- Gisel, I was looking at the picture page and I do have to admit, you look pretty good for a gaming female. Having said that, don't expect any sympathy when we meet on the battlefield. I am a fighter first, lover second. Posts: 2220 | From: Prescott, WI, USA | Registered: Apr 2001
| IP: Logged |
posted
And Profs is for sale still - $2500 - worth it for the new rims, tires, and winch/bullbar alone.
Posts: 5484 | From: St. Paul, Mn | Registered: Apr 2002
| IP: Logged |
posted
what do u want for it Hauser? I can't remember what truck is yours either off hand post me a pic if you get a chance. lemme know the specs.
Posts: 208 | From: Chaska MN | Registered: Aug 2002
| IP: Logged |
posted
Umm 86 toyota 4runner 130k on the engine 220k on the body some rust (wheel wells, tailgate) Not too bad for the year. new brakes, newer tires, new alternator, new battery. It runs well but could use new plugs, wires. The only thing that needs some major attention is the transmission It runs fine in 1-4th gear but not 5th. It vibrates and rattles in 5th. It woud run you $750 for a rebuilt tranny (ask Klaus) if you installed it. I would drive it till the tranny dies. It may last quite a while still. If your looking for a truck to wheel in, there are lots of us (klaus, mikey etc.) that can give you all the info you need on this truck. Let me know if your really interested, otherwise I may just hold on to it.
-------------------- Gisel, I was looking at the picture page and I do have to admit, you look pretty good for a gaming female. Having said that, don't expect any sympathy when we meet on the battlefield. I am a fighter first, lover second. Posts: 2220 | From: Prescott, WI, USA | Registered: Apr 2001
| IP: Logged |
posted
what do u want for it hauser? street legal? what motor does it have. my buddy with the cruiser has a mid 80's truck out at his place that we jumped tell the frame snapped in half but the tranny is still good. so hmmm might work out good.
Posts: 208 | From: Chaska MN | Registered: Aug 2002
| IP: Logged |
posted
Not gonna be able to make a cruiser tranny work. But you can call around and get a junkyard tranny for probably about 200-300 bucks. Unless you plan on doing frame-off work on the 81 your looking at I wouldn't be too excited about wheeling with it. Lots of shit is fixable on the trail but without a welder and some other tools it would be tough to fix a major frame brake! Also, unless your really after the old looks of the pre-1985 pickups I would look for a late '84 or 85 to get the 22re engine. Way stronger than the carb 22r. Also, it runs better at high angles and so on and so forth. The problem with going with a 1986 or newer pickup or 4-runner is IFS. Im not sure how serious you want to wheel but if you want to get into some rock-crawling I would highly recomend a solid front axle!
Anyway only my 2 cents worth. You may know all this shit already because I don't know you all that well. If you ever want to talk wheeling just give me an e-mail. mikewilliam@comcast.net
later
Posts: 486 | From: Eagan, MN | Registered: Oct 2000
| IP: Logged |
posted
Naw you miss read what I said, he has a cruiser that's he uses for his crawler (dresser for like last 10 yrs and what not) but he also has a mid 80's pic up that we jumped tell it snapped in half. I have actrally been thinkin about building (fabracating) a crawler out of 2x4 steel for the frame and just a full cage for the body, but I'd like to use a toyota or rockwell running gear for the drive train. I found a later 80's Toyota with the fuel injected motor, which would be prime for angles like you said and all, the only thing is I just got laid off, along with that they took my Jeep and now I'm outta work so I'm lookin for a starter truck that I can drive for a short time than convert into a wheeler/crawler once I totally get back on my feet again. When I seen this truck I was like hmmm 4 inch lift (Arched leafs and not gay blocks) straight front axel, 93000 miles, but I was also worried about the frame cuz well with out a good foundation the truck is worthless.
But I'm actrally seriously wanting to get more into crawling and I want to build a nice truck. I found someone that can get my 2 &1/2 ton rockwell top spinners for about 1200 bucks a pair. I know I can do all the fabracation cuz I love doing that kinda thing, have a tube bender and all. But I don't know if I wanna go Yota or small chevy for a motor or what not. I'm trying to do this on a small over time budget and with this yota I could possibly do it while still driving the thing for a lil while. I wish I had the money to buy steve's truck but I don't have that extra cash laying around and I don't knwo when I'll start gettin my unemployment rolling in and when if at all I'll find somethin for a new job.
Anyways I've heard nothing but good about Yota crawlers, and thought I might wanna go that route. Anyways more insight would be usefull I still haven' gone to look at this thing and know its sitting. Posts: 208 | From: Chaska MN | Registered: Aug 2002
| IP: Logged |
posted
Matress, let me know if you are still looking to buy a truck. I am really wanting to sell mine now. I am purchasing another vehicle tomorrow and would like to be rid of the 4runner ASAP. Shoot me your number and we can talk about it...
-------------------- Gisel, I was looking at the picture page and I do have to admit, you look pretty good for a gaming female. Having said that, don't expect any sympathy when we meet on the battlefield. I am a fighter first, lover second. Posts: 2220 | From: Prescott, WI, USA | Registered: Apr 2001
| IP: Logged |
posted
Are you buying a FJ-40? Chad said you were looking at some silly vehicles.
Posts: 5484 | From: St. Paul, Mn | Registered: Apr 2002
| IP: Logged |
posted
nah, a car. I decided that I can 4-wheel vicariously through you guys I can either do truck crap and then 4-wheel and break it so I have to fix it again, or buy a car, fix it up once and drive it. I am buying a 1972 Datsun 240Z tomorrow. It was the same car my dad had when we were kids so I was pretty excited to find one in nice shape. The car is rust free and runs well. It needs a little work (brakes, ujoint) but is in far better condition than the majority I looked at. Let me know if anyone is looking for a truck.
-------------------- Gisel, I was looking at the picture page and I do have to admit, you look pretty good for a gaming female. Having said that, don't expect any sympathy when we meet on the battlefield. I am a fighter first, lover second. Posts: 2220 | From: Prescott, WI, USA | Registered: Apr 2001
| IP: Logged |
posted
Is this your daily driver???? That thing is gonna suck like nobodys business come your first real MN winter. (no doubt it'll be a blast in the summer on twisty roads)
Posts: 2469 | From: Anchorage, AK | Registered: Oct 2001
| IP: Logged |
posted
Not my daily driver. it is going to be my fun car. c'mon now, it has posi in the back
-------------------- Gisel, I was looking at the picture page and I do have to admit, you look pretty good for a gaming female. Having said that, don't expect any sympathy when we meet on the battlefield. I am a fighter first, lover second. Posts: 2220 | From: Prescott, WI, USA | Registered: Apr 2001
| IP: Logged |
posted
How much do you want for your 4-runner? I might be interested if I finally get around to heating my garage this year!
Posts: 486 | From: Eagan, MN | Registered: Oct 2000
| IP: Logged |
posted
I was thinking 1,000 bucks. If it is for you or someone I know, we can talk about it. I am just trying to recoup some of the cost of buying this car. I have room for 3 cars in my garage, not 4 heh. Do you have a furnace for your garage yet? My folks are selling their house in Eagan and I know my dad is taking his out of the house over there. Let me know if your interested and I'll aks him what he wants for it.
-------------------- Gisel, I was looking at the picture page and I do have to admit, you look pretty good for a gaming female. Having said that, don't expect any sympathy when we meet on the battlefield. I am a fighter first, lover second. Posts: 2220 | From: Prescott, WI, USA | Registered: Apr 2001
| IP: Logged |
posted
I bought this car last night. here is a pic. It isnt my exact car but it is the same color and body style. Actually it is pretty much in the same shape except the wheels on mine are 60 series and the paint is nicer on this pic than mine...
-------------------- Gisel, I was looking at the picture page and I do have to admit, you look pretty good for a gaming female. Having said that, don't expect any sympathy when we meet on the battlefield. I am a fighter first, lover second. Posts: 2220 | From: Prescott, WI, USA | Registered: Apr 2001
| IP: Logged |
posted
Hauser post me some specs and pics sence I can't get to the pics anymore. damn new site shit, anyways I might be intrested I have some shit int he processes and shit so yea.
Posts: 208 | From: Chaska MN | Registered: Aug 2002
| IP: Logged |
posted
Matress, post your number and I'll call you, or give me your AIM or MSN messenger info...
-------------------- Gisel, I was looking at the picture page and I do have to admit, you look pretty good for a gaming female. Having said that, don't expect any sympathy when we meet on the battlefield. I am a fighter first, lover second. Posts: 2220 | From: Prescott, WI, USA | Registered: Apr 2001
| IP: Logged |
Hauser gimme a call again when u get a chance I'd like to come out and take a look at ur truck when I get a chance. How's the tabs/plates? everything up to date? but it doesn't sound too bad so yea. give me a call on my cell. I work 2-8pm monday-friday saturdays 8am-3pm, so if you wanna give me a call during the week just try todo so about 5:30 or later. anyways later
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
Hers's a pic
![[beer]](graemlins/beer.gif)
![[Big Grin]](biggrin.gif)
![[lol]](graemlins/lol.gif)
![[Razz]](tongue.gif)
![[Wink]](wink.gif)
I can either do truck crap and then 4-wheel and break it so I have to fix it again, or buy a car, fix it up once and drive it. I am buying a 1972 Datsun 240Z tomorrow. It was the same car my dad had when we were kids so I was pretty excited to find one in nice shape. The car is rust free and runs well. It needs a little work (brakes, ujoint) but is in far better condition than the majority I looked at. Let me know if anyone is looking for a truck.![[Smile]](smile.gif)
