posted
Anyone have any ideas where I might find hubs and spindles for a solid axle (81-85) Toyota truck or 4Runner? I need them for the rear full-float kit and the spindles alone will cost over $500 new from Toyota. Hubs would be about $300. Checker doesn't carry either part. Tried Viking and John's Auto in Blaine but neither had anything. If anyone has these parts laying around and wants to sell them or knows of a good source to get them, let me know.
Posts: 402 | From: Mpls, MN | Registered: Oct 2000
| IP: Logged |
posted
Yes, I brought it down to the farm and Cramer looked at it. The website says you need spindles but those were actually included in the kit. He's got a set of hubs I can buy. The only thing I'm after now is a set of the factory Aisin lockouts from an '85 or earlier front axle. Cramer recommened those over Warns because the cone-washers make them less likely to come loose.
Posts: 402 | From: Mpls, MN | Registered: Oct 2000
| IP: Logged |
posted
I have a couple of sets sitting here that I tried to use on my IFS front end. They didn't work with it but they may work with a solid front axle. Call me or stop over. Posts: 620 | Registered: Oct 2000
| IP: Logged |